Ownership tool

Real fuel consumption & fill-up log

Dashboard economy estimates run optimistic and window-sticker ratings are lab numbers. The fill-up method works backward from actual pump gallons: gallons added at this fill ÷ miles since the last fill = your real economy. Use the quick calculator for a single interval, or keep the log below — records stay in this browser.

Presets

Between two fill-ups
Cost (leave 0 to skip)

Real economy this interval

30.8 mpg

Measured between two brimmed fill-ups

320.0 mi between fill-ups on 10.40 gal of fuel: real economy is 30.8 mpg, or $0.12/mi per mile.

Interval distance320.0 mi
Fuel used10.40 gal
Fuel economy (MPG)30.8 mpg
Equivalent L/100km7.6 L/100km
Cost per mile$0.12/mi
Cost per 100 miles$12.19/100mi
Effective price$3.75/gal

Fill-up method: the fuel burned over the interval is the gallons added at the second brimmed stop — valid only when both fills stopped at the click and nothing went unlogged.

Fill-up log

Log every stop: odometer, gallons, and what you paid (or the pump price). An interval economy figure appears between two consecutive 'full tank' entries; partial or missed fill-ups are flagged and kept out of the lifetime average. Records live only in this browser — export a backup before switching devices.

DateOdometerFuelCostIntervalEconomy

No fill-ups yet. Enter the odometer reading of your last full tank as the first record — it is the baseline and computes nothing by itself; intervals start from the second fill-up.

How the fill-up method works

Brim the tank and note the odometer (A). Drive normally, brim it again and note the odometer (B) plus the gallons added (V). Interval economy = (B−A) ÷ V — because both stops ended at the click, those V gallons are exactly what the car burned.

It only holds when both fills go to the same point and no fill in between was skipped. An unlogged fill inflates the interval — flag it as missed and the interval leaves the average; untick 'full tank' on a partial stop and its interval is excluded the same way.

Lifetime average = total gallons across valid intervals ÷ total miles across them — not the mean of the per-interval MPGs, because intervals cover different distances.

Cost basis: cost per mile = amount paid at this fill ÷ interval miles. Enter the receipt total or the pump price; when both are given the total wins and price is derived.

How to fill each field

FAQ

Why not just read the dashboard MPG?

Most trip computers run 5–15% optimistic and the algorithms are opaque — some exclude idle fuel. The fill-up method uses the pump's metered gallons, which has nothing to do with the dashboard estimate.

What if the two fills weren't consecutive?

The interval can still be estimated, but its fuel figure is understated — gallons added at a partial stop are less than what was burned. Untick 'full tank' on that record and the interval is flagged and excluded from the average.

How do I fix a missed fill-up?

If you still have the receipt, add it with the odometer at the time — records sort by odometer automatically. Otherwise flag the next record as missed: that interval drops out of the average while its miles still count toward the total.

How many records before the number is real?

Three to five consecutive brimmed intervals give a decent picture of everyday use. City congestion, highway cruising and climate control swing individual readings, so compare intervals by scenario rather than chasing one number.

Why do two back-to-back intervals differ a lot?

Single intervals absorb traffic, temperature, load and exactly when the pump clicked off — ±1 L/100km swings are common. Watch the trend and the lifetime average; neither the best nor the worst tank is the truth.

Does this work for hybrids and PHEVs?

Any car can use the fill-up math for its gasoline, but a plug-in that drove mostly on battery gets a 'fuel economy' that excludes electricity — it is not total energy consumption. Subtract electric miles before interpreting.